Need help with Mesa 7i97

Hello

Im running mesa 7I97 and deb9 with master branch.

7i97 starts up nice, and is connected, encoders work.

After that problems starts.
Inputs are connected but do not show in gpio.
Found inputs from: inmux.00.input-nn and 6 outputs from ssr.00.out-nn.
Are these as them supposed to be?


Next problem is analog output, without any output request(pwmgen.00.value is 0) it will give full 10 Vdc.
any idea why?



Then next is how to add 7i84, will hostmot recognize this automatically?

Inputs on the 7I97 are inmux
Outputs are SSR
PWM offset-mode must be enabled

All sserial devices are recognized automatically

Thanks, that solved biggest issue.

What about 7i84, is it supported in hostmot with 7i97?

Ok thanks.