7i97 and 7i78 CNC mill, 7i92M, 7i76 with 2 THCAD for Plasma
29 Nov 2020 12:01 #190601
by cnc4ever
Hi there
I have 2 questions about Mesa cards
First I got a Plasma cutter with a 7i76 connected to a 7i92M .
Now i would like to use 2 THCAD (Hypersensing and Torch hight).
Is there a Firmware for that and when yes witch one?
The other question is, I have a CNC mill with Fanuc drives (Analog and Encoder).
I would like to add a 4th axis in future, but it will be a step and dir one.
I have a 7i97 and a 7i64 to controll the machine so fare.
Now is it possible to add a 7i78 (for 4th axis) and maybe a 7i73 (over the smart serial port).
Thanks
I have 2 questions about Mesa cards
First I got a Plasma cutter with a 7i76 connected to a 7i92M .
Now i would like to use 2 THCAD (Hypersensing and Torch hight).
Is there a Firmware for that and when yes witch one?
The other question is, I have a CNC mill with Fanuc drives (Analog and Encoder).
I would like to add a 4th axis in future, but it will be a step and dir one.
I have a 7i97 and a 7i64 to controll the machine so fare.
Now is it possible to add a 7i78 (for 4th axis) and maybe a 7i73 (over the smart serial port).
Thanks
Please Log in or Create an account to join the conversation.
29 Nov 2020 14:36 #190607
by PCW
Replied by PCW on topic 7i97 and 7i78 CNC mill, 7i92M, 7i76 with 2 THCAD for Plasma
For a 7i92 with a 7I76, the Plasma config would be 7i92_7i76x1pl.bit:
And yes, a 7I97 will work with a 7I78+7I73, here's the firmware for a 7I97+7I78:
And yes, a 7I97 will work with a 7I78+7I73, here's the firmware for a 7I97+7I78:
The following user(s) said Thank You: cnc4ever
Please Log in or Create an account to join the conversation.
29 Nov 2020 16:56 #190616
by cnc4ever
Replied by cnc4ever on topic 7i97 and 7i78 CNC mill, 7i92M, 7i76 with 2 THCAD for Plasma
Thanks a lot
Please Log in or Create an account to join the conversation.
Time to create page: 0.100 seconds