Mesa 7i76e Plasma bit file

22 Apr 2021 19:00 - 22 Apr 2021 19:16 #206829 by txtrone

Replied by txtrone on topic Mesa 7i76e Plasma bit file

PCW wrote:
I would set num_encoders=2 and use the "B" encoder input (encoder 01)
for the Ohmic sensing

Done. Here is the new error. Attached are my machine and connection hal files.

twopass: Error in file ./mark_i_connections.hal:
    unlink failed
HAL: ERROR: pin 'debounce.0.1.in' not found
15153

File Name: mark_i.hal
File Size:11 KB

File Name: mark_i_con...ions.hal
File Size:2 KB

Last edit: 22 Apr 2021 19:16 by txtrone.

Please Log in or Create an account to join the conversation.

22 Apr 2021 20:37 #206832 by PCW

Replied by PCW on topic Mesa 7i76e Plasma bit file

The "dbounce" component is loaded but a "debounce" pin is referenced

Please Log in or Create an account to join the conversation.

22 Apr 2021 22:07 #206836 by rodw

Replied by rodw on topic Mesa 7i76e Plasma bit file

Sorry. if it was based on an example of mine, I blew up the Encoder A/0 a long time ago so have been using encoder 1 & 2 forever

Please Log in or Create an account to join the conversation.

22 Apr 2021 22:09 #206837 by txtrone

Replied by txtrone on topic Mesa 7i76e Plasma bit file

rodw wrote:
Sorry. if it was based on an example of mine, I blew up the Encoder A/0 a long time ago so have been using encoder 1 & 2 forever

heh ... Spaceship emergency landing?

The following user(s) said Thank You: rodw

Please Log in or Create an account to join the conversation.

22 Apr 2021 22:10 #206839 by txtrone

Replied by txtrone on topic Mesa 7i76e Plasma bit file

PCW wrote:
The "dbounce" component is loaded but a "debounce" pin is referenced

Yes, I missed this part at the bottom of the error report.

HAL: ERROR: pin 'debounce.0.1.in' not found
15153

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.079 seconds