Safe for Mesa?
- tcninja
- Offline
- Junior Member
-
Less
More
- Posts: 23
- Thank you received: 1
11 May 2021 20:09 #208575
by tcninja
Safe for Mesa? was created by tcninja
Can I hook this to a Mesa board without a diode?
www.ebay.com/itm/333920011768
Doesn’t actually say it’s solid state.
www.ebay.com/itm/333920011768
Doesn’t actually say it’s solid state.
Please Log in or Create an account to join the conversation.
- PCW
-
- Away
- Moderator
-
Less
More
- Posts: 18808
- Thank you received: 5193
11 May 2021 20:25 - 11 May 2021 20:26 #208578
by PCW
Replied by PCW on topic Safe for Mesa?
I think that's a standard relay with some kind of coil interface
electronics to allow 12-24V AC/DC operation (maybe a bridge rectifier
+ regulator). It should be OK without a flyback diode.
electronics to allow 12-24V AC/DC operation (maybe a bridge rectifier
+ regulator). It should be OK without a flyback diode.
Last edit: 11 May 2021 20:26 by PCW.
Please Log in or Create an account to join the conversation.
- tcninja
- Offline
- Junior Member
-
Less
More
- Posts: 23
- Thank you received: 1
11 May 2021 20:27 #208580
by tcninja
Replied by tcninja on topic Safe for Mesa?
Thanks!
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.070 seconds