Yaskawa cacr servo drives

More
10 Aug 2021 04:05 #217368 by Baldkiwi
Greetings from New Zealand.
I've recently got a Kondia K600 that has Yaskawa Cacr sr05be12f-e drives.
One of the drives does not power up & get to bb stage.
Does anyone know of an affordable repair facility or an equivalent drive I could put in it's place.
Many thanks in advance, Stephen.

Please Log in or Create an account to join the conversation.

More
11 Aug 2021 00:28 #217450 by andypugh
Replied by andypugh on topic Yaskawa cacr servo drives
It might be worth asking on CNCzone too.

Please Log in or Create an account to join the conversation.

More
11 Aug 2021 02:33 #217462 by Baldkiwi
Replied by Baldkiwi on topic Yaskawa cacr servo drives
Thanks for that, cheers Stephen

Please Log in or Create an account to join the conversation.

More
16 Aug 2021 23:42 #217929 by cakeslob
Replied by cakeslob on topic Yaskawa cacr servo drives
Does it not power up at all, as in nothing happens, no lights, nothign, when power on? 
could be something "simple"  like this,
spaz.org/~jake/robot/yaskawa-servopack-repair.pdf

Service wise? Ive had my old ass yaskawa servos repaired and encoder replaced by a local company. I had 2 options, buy a used replacement on ebay or have it repaired by the company. Prices were unfortunately close, so i went with the sure thing and got it repaired. but it wasnt cheap (nothing yaskawa seems to be), like $2000
I dont have any recomendations for a newzealand servo repair shop, but surprisingly google says theres like 5 places in auckland

Please Log in or Create an account to join the conversation.

Moderators: PCWjmelson
Time to create page: 0.065 seconds
Powered by Kunena Forum