7i97 already connected and working with linuxcnc. No problems
address 10.10.10.11
Code:
arnold@hpcnc:~$ mesaflash --device 7i97 --readhmid
No 7I97 board found
or
Code:
arnold@hpcnc:~$ mesaflash --device 7i97 --addr 10.10.10.11 --readhmid
No 7I97 board found
ip a
Code:
arnold@hpcnc:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 74:46:a0:ad:31:c7 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.11/8 brd 10.255.255.255 scope global noprefixroute eno1
valid_lft forever preferred_lft forever
inet6 fe80::175e:7030:3484:a52e/64 scope link noprefixroute
valid_lft forever preferred_lft forever
I am preparing myself to know how to use mesaflash to "flash" the 7i97 with a new .bit, but I am failing at the very beginning. just reading it!
What is the problem?
Thanks in advance, and happy new year!
