driver options for fanuc
- vre
- Offline
- Platinum Member
-
Less
More
- Posts: 605
- Thank you received: 17
24 Jan 2022 13:33 #232956
by vre
driver options for fanuc was created by vre
Hello.
What driver options exist that are compatible with fanuc servo motors ais series and power up to 4.5kw ?
argon/stmbl are up to 2kw what other exists for linuxcnc ?
What driver options exist that are compatible with fanuc servo motors ais series and power up to 4.5kw ?
argon/stmbl are up to 2kw what other exists for linuxcnc ?
Please Log in or Create an account to join the conversation.
- jmelson
- Offline
- Moderator
-
Less
More
- Posts: 512
- Thank you received: 123
24 Jan 2022 15:25 - 24 Jan 2022 15:26 #232974
by jmelson
Replied by jmelson on topic driver options for fanuc
We (pico systems) make a converter for the propietary Fanuc encoders. That is the big issue with using the Fanuc red cap motors with various brushless drives. There are Coply, AMC, Servo Dynamics, etc. drives that need traditional encoder with Hall sensor feedback, and our converter provides that. We also make our own drives, but they will not handle 4+ KW motors.
Jon
Jon
Last edit: 24 Jan 2022 15:26 by jmelson.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.054 seconds