1. Hardware & Machines
  3. Driver Boards
  5. 3D-printed DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC

3D-printed DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC

More
19 Nov 2022 01:29 #257087 by Doug @ Design8Studio.com
3D-printed DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC was created by Doug @ Design8Studio.com
I'm pretty new to posting on this forum. If I post something that's not kosher please let me know.

Free printable file at: www.printables.com/model/320204-din-rail...io-card-for-plasma-c

Short video on it: 
File Attachment:
The following user(s) said Thank You: billykid, tommylight, Clive S, macsddau@linuxcnc, JT, Markgonz

Please Log in or Create an account to join the conversation.

More
21 Nov 2022 12:39 #257211 by andypugh
Replied by andypugh on topic 3D-printed DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC
Thanks.
I did one for a THCAD too:
www.thingiverse.com/thing:4018328
The following user(s) said Thank You: macsddau@linuxcnc, CarterKraft, Doug @ Design8Studio.com

Please Log in or Create an account to join the conversation.

More
21 Nov 2022 15:28 #257225 by tommylight
Replied by tommylight on topic 3D-printed DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC

Thanks.
I did one for a THCAD too:
www.thingiverse.com/thing:4018328

I used those! :)
Thank you.
The following user(s) said Thank You: Doug @ Design8Studio.com

Please Log in or Create an account to join the conversation.

More
21 Nov 2022 16:56 #257236 by Doug @ Design8Studio.com
Replied by Doug @ Design8Studio.com on topic 3D-printed DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC
Here are two more short videos about my use of them, including an unexpected realization I had unintentionally chosen a height that made it so I could have the ethernet port accessible from the outside back of my box:



Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
  1. Hardware & Machines
  3. Driver Boards
  5. 3D-printed DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC
Time to create page: 0.386 seconds
Powered by Kunena Forum