Mesa 7I77 and Milltronics mill wiring

3 years 10 months ago #259369 by brianTruck

Replied by brianTruck on topic Mesa 7I77 and Milltronics mill wiring

CR1B

Please Log in or Create an account to join the conversation.

3 years 10 months ago #259371 by Masiwood123

Replied by Masiwood123 on topic Mesa 7I77 and Milltronics mill wiring

22 is 0V from 24v power supply?

Please Log in or Create an account to join the conversation.

3 years 10 months ago #259400 by tommylight

Replied by tommylight on topic Mesa 7I77 and Milltronics mill wiring

OK, so that wiring should not be used anymore, just wiring the drives to Mesa should work.
See the link i posted on the procedure to wire and test.

The following user(s) said Thank You: brianTruck

Please Log in or Create an account to join the conversation.

3 years 10 months ago #259402 by brianTruck

Replied by brianTruck on topic Mesa 7I77 and Milltronics mill wiring

24 volt power

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.168 seconds