Where to learn to build or modify custom bit files for my Mesa cards?

More
3 years 8 months ago #265586 by DrKnow65
You nailed it, I didn't expect the inbound.vhd and oneshot.vhd to be in the dropdown to add as sources.

Thank you again.


I am now down to one error,
Map:258 - A problem was encountered attempting to get the license for this
architecture.


I suppose something here is proprietary and needs a signature maybe?

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #265590 by PCW
Did you register your copy of webpack?

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #265593 by DrKnow65
I did, but I also had to change an nvme that went sideways and it changed my MAC or something.
I found that my "Host ID Matches" was red for the ISE in the license manager though everything else was green.

Getting the license sorted now.

You are good at this :) I'm working on getting better too.

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #265599 by DrKnow65
"Network Interface Card (NIC) ID: 000000000000" on the license manager I suspect is where I am getting shut down.
I have the correct (licensed) mac showing up when I "ip link show" in the terminal, it just isn't populating in the license manager.

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether nn:nn:nn:nn:nn:nn brd ff:ff:ff:ff:ff:ff
(the "nn:nn:nn:nn:nn:nn: is my redacted mac)

I wonder if the license manager is somehow populating with the link/loopback ID? 

I think a good Linux user is a good troubleshooter. I'm trying to persevere...

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #265603 by PCW
Is it possible you are trying to install full ISE rather then webpack?

I have this in my Licence:

"This is license NODELOCKED to HOSTID=ANY;"

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #265605 by DrKnow65
That sounds logical, the instructions I followed to install it had me download the full file not the segmented files (or web pack). A 6Gb download surely is not a webpack :)

I will look into what I have done. I was admittedly lost immediately when there were no "READ ME"s in the download. I don't feel impressed with Xilinx on the instructions front.

I will keep poking at it and see what I can do.

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.354 seconds
Powered by Kunena Forum