7i96 issue read/write

More
3 years 7 months ago - 3 years 7 months ago #266424 by evengravy
Replied by evengravy on topic 7i96 issue read/write
I understand, but it is indicative of overall system stability. I have already ran ping tests on all systems as a rule. Honestly non of them are great but Buster is much more stable than v11 for me on this system for both network and servo. Also graphically v11 was sluggish on this box.

We'll see over the next few days how it goes, if I continue to have issue it will be a new computer order, I think. So far, buster seems good, comparible with stretch before I began to have issues. 
Last edit: 3 years 7 months ago by evengravy.

Please Log in or Create an account to join the conversation.

More
2 years 8 months ago #293206 by RNZ
Replied by RNZ on topic 7i96 issue read/write
Did this ever get resolved?  I have a Raspberry Pi 5 and 7i96s and I am seeing the same issues:

hm2/hm2_7i92.0: error queuing read! iter=xxx
hm2/hm2_7i92.0: error finishing write! iter=xxx

forum.linuxcnc.org/9-installing-linuxcnc...i-5?start=110#293125

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.076 seconds
Powered by Kunena Forum