Raspberry Pi / LinuixCNC
- RainX
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
06 Apr 2023 13:39 #268430
by RainX
Raspberry Pi / LinuixCNC was created by RainX
I am new to doing CNC builds. I have a Wabeco CNC machine and I am replacing the current Stepper Drivers and Controller so I can use LinuxCNC.
Currently, my CNC machine has installed:
1. (3) Sanyo Denki Stepper motors Model # 103-H8221-6241 (6A) Spec Sheet enclosed.
I purchased:
2. (3) EM882S Leadshine Stepper Drivers (Spec Sheet enclosed)
What options are available to connect the (3) Stepper motors and (3) Stepper Drivers to a controller / LinuxCNC?
What do I need to buy?
If possible but NOT mandatory I would like to use a Raspberry PI for this build. I am OPEN to all and any suggestions.
Currently, my CNC machine has installed:
1. (3) Sanyo Denki Stepper motors Model # 103-H8221-6241 (6A) Spec Sheet enclosed.
I purchased:
2. (3) EM882S Leadshine Stepper Drivers (Spec Sheet enclosed)
What options are available to connect the (3) Stepper motors and (3) Stepper Drivers to a controller / LinuxCNC?
What do I need to buy?
If possible but NOT mandatory I would like to use a Raspberry PI for this build. I am OPEN to all and any suggestions.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 20193
- Thank you received: 6874
06 Apr 2023 17:45 #268445
by tommylight
Replied by tommylight on topic Raspberry Pi / LinuixCNC
There are 3 topics with the same subject started by you, pick one and stick with it so we can delete the other 2.
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.061 seconds