problem with setup of ah 7i92 with 7i77, 7i71, 7,70 and 7i74 with missing smarts

More
24 Apr 2023 19:58 #269775 by MarkusBec
Hello 
I have a problem with my stetup.

i have flashed the 7i92 bit the bitfile 7i92_7i77_7i74D.bit 
at the moment i am waiting for the 7i74 to connect a stmbl and the 7i70

to the 7i77 i connected the 7i71 but it is not recognised.


this is what i get with mesa flash: 
IO Connections for P2
Pin#  I/O   Pri. func    Sec. func       Chan      Pin func        Pin Dir

 1      0   IOPort       SSerial          0        TXEn2           (Out)
14      1   IOPort       SSerial          0        TXData2         (Out)
 2      2   IOPort       SSerial          0        RXData2         (In)
15      3   IOPort       SSerial          0        TXData1         (Out)
 3      4   IOPort       SSerial          0        RXData1         (In)
16      5   IOPort       SSerial          0        TXData0         (Out)
 4      6   IOPort       SSerial          0        RXData0         (In)
17      7   IOPort       MuxedQCountSel   0        MuxSel0         (Out)
 5      8   IOPort       MuxedQCount      0        MuxQ-A          (In)
 6      9   IOPort       MuxedQCount      0        MuxQ-B          (In)
 7     10   IOPort       MuxedQCount      0        MuxQ-IDX        (In)
 8     11   IOPort       MuxedQCount      1        MuxQ-A          (In)
 9     12   IOPort       MuxedQCount      1        MuxQ-B          (In)
10     13   IOPort       MuxedQCount      1        MuxQ-IDX        (In)
11     14   IOPort       MuxedQCount      2        MuxQ-A          (In)
12     15   IOPort       MuxedQCount      2        MuxQ-B          (In)
13     16   IOPort       MuxedQCount      2        MuxQ-IDX        (In)

IO Connections for P1
Pin#  I/O   Pri. func    Sec. func       Chan      Pin func        Pin Dir

 1     17   IOPort       SSerial          1        RXData0         (In)
14     18   IOPort       SSerial          1        RXData1         (In)
 2     19   IOPort       SSerial          1        RXData2         (In)
15     20   IOPort       SSerial          1        RXData3         (In)
 3     21   IOPort       SSerial          1        TXData0         (Out)
16     22   IOPort       SSerial          1        TXData1         (Out)
 4     23   IOPort       SSerial          1        TXData2         (Out)
17     24   IOPort       SSerial          1        TXData3         (Out)
 5     25   IOPort       SSerial          1        RXData4         (In)
 6     26   IOPort       SSerial          1        RXData5         (In)
 7     27   IOPort       None           
 8     28   IOPort       None           
 9     29   IOPort       SSerial          1        TXData4         (Out)
10     30   IOPort       SSerial          1        TXData5         (Out)
11     31   IOPort       None           
12     32   IOPort       None           
13     33   IOPort       None 

and this is my linuxcnc error:
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:12:02:08
hm2_eth: discovered 7I92
hm2/hm2_7i92.0: Low Level init 0.15
hm2/hm2_7i92.0: Smart Serial Firmware Version 43
Board hm2_7i92.0.7i77.0.0 Hardware Mode 0 = standard
Board hm2_7i92.0.7i77.0.0 Software Mode 0 = input_output
Board hm2_7i92.0.7i77.0.0 Software Mode 1 = io_analog
Board hm2_7i92.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage
Board hm2_7i92.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage
Board hm2_7i92.0.7i77.0.1 Hardware Mode 0 = standard
Board hm2_7i92.0.7i77.0.1 Software Mode 0 = analogout_enables
hm2/hm2_7i92.0: Smart Serial Firmware Version 43
hm2/hm2_7i92.0: 34 I/O Pins used:
hm2/hm2_7i92.0:     IO Pin 000 (P2-01): IOPort
hm2/hm2_7i92.0:     IO Pin 001 (P2-14): IOPort
hm2/hm2_7i92.0:     IO Pin 002 (P2-02): IOPort
hm2/hm2_7i92.0:     IO Pin 003 (P2-15): Smart Serial Interface #0, pin tx1 (Output)
hm2/hm2_7i92.0:     IO Pin 004 (P2-03): Smart Serial Interface #0, pin rx1 (Input)
hm2/hm2_7i92.0:     IO Pin 005 (P2-16): Smart Serial Interface #0, pin tx0 (Output)
hm2/hm2_7i92.0:     IO Pin 006 (P2-04): Smart Serial Interface #0, pin rx0 (Input)
hm2/hm2_7i92.0:     IO Pin 007 (P2-17): Muxed Encoder Select #0, pin Mux Select 0 (Output)
hm2/hm2_7i92.0:     IO Pin 008 (P2-05): Muxed Encoder #0, pin Muxed A (Input)
hm2/hm2_7i92.0:     IO Pin 009 (P2-06): Muxed Encoder #0, pin Muxed B (Input)
hm2/hm2_7i92.0:     IO Pin 010 (P2-07): Muxed Encoder #0, pin Muxed Index (Input)
hm2/hm2_7i92.0:     IO Pin 011 (P2-08): Muxed Encoder #1, pin Muxed A (Input)
hm2/hm2_7i92.0:     IO Pin 012 (P2-09): Muxed Encoder #1, pin Muxed B (Input)
hm2/hm2_7i92.0:     IO Pin 013 (P2-10): Muxed Encoder #1, pin Muxed Index (Input)
hm2/hm2_7i92.0:     IO Pin 014 (P2-11): Muxed Encoder #2, pin Muxed A (Input)
hm2/hm2_7i92.0:     IO Pin 015 (P2-12): Muxed Encoder #2, pin Muxed B (Input)
hm2/hm2_7i92.0:     IO Pin 016 (P2-13): Muxed Encoder #2, pin Muxed Index (Input)
hm2/hm2_7i92.0:     IO Pin 017 (P1-01): IOPort
hm2/hm2_7i92.0:     IO Pin 018 (P1-14): IOPort
hm2/hm2_7i92.0:     IO Pin 019 (P1-02): IOPort
hm2/hm2_7i92.0:     IO Pin 020 (P1-15): IOPort
hm2/hm2_7i92.0:     IO Pin 021 (P1-03): IOPort
hm2/hm2_7i92.0:     IO Pin 022 (P1-16): IOPort
hm2/hm2_7i92.0:     IO Pin 023 (P1-04): IOPort
hm2/hm2_7i92.0:     IO Pin 024 (P1-17): IOPort
hm2/hm2_7i92.0:     IO Pin 025 (P1-05): IOPort
hm2/hm2_7i92.0:     IO Pin 026 (P1-06): IOPort
hm2/hm2_7i92.0:     IO Pin 027 (P1-07): IOPort
hm2/hm2_7i92.0:     IO Pin 028 (P1-08): IOPort
hm2/hm2_7i92.0:     IO Pin 029 (P1-09): IOPort
hm2/hm2_7i92.0:     IO Pin 030 (P1-10): IOPort
hm2/hm2_7i92.0:     IO Pin 031 (P1-11): IOPort
hm2/hm2_7i92.0:     IO Pin 032 (P1-12): IOPort
hm2/hm2_7i92.0:     IO Pin 033 (P1-13): IOPort
hm2/hm2_7i92.0: registered
hm2_eth: in hm2_eth_reset
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments

attached my config  

File Attachment:

File Name: spinner2.zip
File Size:11 KB
Attachments:

Please Log in or Create an account to join the conversation.

More
24 Apr 2023 21:03 #269781 by PCW

Please Log in or Create an account to join the conversation.

More
24 Apr 2023 21:06 #269782 by MarkusBec
yes

i think this means it is not enable but i am not sure
hm2/hm2_7i92.0: IO Pin 000 (P2-01): IOPort
hm2/hm2_7i92.0: IO Pin 001 (P2-14): IOPort
hm2/hm2_7i92.0: IO Pin 002 (P2-02): IOPort

i think i have enabled all ports with sserial_port_0=000 sserial_port_1=00000

Please Log in or Create an account to join the conversation.

More
24 Apr 2023 21:08 #269784 by PCW
The startup pin list just shows that no sserial device was found

Possibly connector wiring?

Please Log in or Create an account to join the conversation.

More
24 Apr 2023 22:39 #269793 by MarkusBec
the 7i71 was in setup mode. now it works

the error massage is a little bit misleading

Please Log in or Create an account to join the conversation.

Moderators: PCWjmelson
Time to create page: 0.173 seconds
Powered by Kunena Forum