Transformer isolation outputs

One of these days I will finish my re-flow oven. Soldering would have gone much faster and come out cleaner if I was not doing it by hand. Test board assembled and ready to hook up to my Mesa 7i92th. I am not sure how I missed it, but you can see the idc hdr needs to be rotated 180*. This has no functional benefit but will ease ribbon cable routing in my electrical cabinet (no twist in ribbon).

image missing https://desertshedstudio.com/wp-content/uploads/2024/02/DSS-SSR4_Rev1.jpg

And one custom Bin file later. It's Alive ! haha I will need to fix a few simple errors such as silkscreen, hdr orientation ect. Otherwise we have transformer isolated outputs; how cool image missing /media/kunena/emoticons/cool.png .

Video does not want to embed properly; lets try a link. " Video "

In regards to the Bin file: @PCW after synthesizing in Efinity, within the Result tab under Interface. I get a "Unassigned Core Pins: 2" error. Otherwise no problems and the file flashes and functions exactly as expected. I am new to the Efinity IDE and was unsure if that was a result of my new pin vhd work.

The unassigned core pins are probably TP0 and TP1,
leftovers from performance testing. I haven't bothered
to remove them yet, the message is harmless.

I have the board about where I want it for my use case. I will be organizing my files and posting to GitHub shortly.

Files are up on my GitHub " Here " . Feel free to check out the project and make your own.