7c81 hdbb2.bit
31 Mar 2024 00:10 #297246
by x26iclone
7c81 hdbb2.bit was created by x26iclone
Hi,
Hoping to get some help. I recently replaced my G540 (due to death) with some Stepperonline drivers and two SainSmart 5 axis bobs(www.amazon.com/gp/product/B0093Y897A/ref..._title?ie=UTF8&psc=1). Shortly after my Dell Optiplex 780 SFF died. I was using the 5i25_hdbb2 firmware on my 5i25 and all was well until the 780 died. After trying to find a replacement PC, I decided to go with a RPi4 and 7c80 combination. I'm hoping to not have to rewire anything. Is there a such firmware package as 7c81_hdbb2.bit 7c81_hdbb2.xml 7c81_hdbb2.pin? Or is there something similar that I could use?
Thanks in advance for any help/advise.
Hoping to get some help. I recently replaced my G540 (due to death) with some Stepperonline drivers and two SainSmart 5 axis bobs(www.amazon.com/gp/product/B0093Y897A/ref..._title?ie=UTF8&psc=1). Shortly after my Dell Optiplex 780 SFF died. I was using the 5i25_hdbb2 firmware on my 5i25 and all was well until the 780 died. After trying to find a replacement PC, I decided to go with a RPi4 and 7c80 combination. I'm hoping to not have to rewire anything. Is there a such firmware package as 7c81_hdbb2.bit 7c81_hdbb2.xml 7c81_hdbb2.pin? Or is there something similar that I could use?
Thanks in advance for any help/advise.
Please Log in or Create an account to join the conversation.
31 Mar 2024 01:31 #297256
by PCW
Replied by PCW on topic 7c81 hdbb2.bit
You would normally use 5ABOB firmware for those SainSmart BOBs
(I think 5ABOBX2 firmware is the default on the 7C81 but in any case
its standard firmware)
(I think 5ABOBX2 firmware is the default on the 7C81 but in any case
its standard firmware)
Please Log in or Create an account to join the conversation.
Time to create page: 0.090 seconds