hm2/hm2_7i92.0: Error finishing read!
- PCW
-
- Away
- Moderator
-
Less
More
- Posts: 18440
- Thank you received: 5036
10 Nov 2024 15:16 #314192
by PCW
Replied by PCW on topic hm2/hm2_7i92.0: Error finishing read!
31 s32 RW 235371 servo-thread.tmax
So the maximum servo thread time is ~ 1/4 of the servo period so looks fine.
So the maximum servo thread time is ~ 1/4 of the servo period so looks fine.
Please Log in or Create an account to join the conversation.
- angelnu
- Offline
- Junior Member
-
Less
More
- Posts: 39
- Thank you received: 4
11 Nov 2024 05:12 #314227
by angelnu
Replied by angelnu on topic hm2/hm2_7i92.0: Error finishing read!
Thank you for your help. Yesterday the router was working for three hours without any problem.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- PCW
-
- Away
- Moderator
-
Less
More
- Posts: 18440
- Thank you received: 5036
11 Nov 2024 17:18 #314263
by PCW
Replied by PCW on topic hm2/hm2_7i92.0: Error finishing read!
You can keep tabs on how much margin you have
by looking at the tmax values after long LinuxCNC
uptimes. My guess is that it's unlikely you will see
the error again.
by looking at the tmax values after long LinuxCNC
uptimes. My guess is that it's unlikely you will see
the error again.
The following user(s) said Thank You: angelnu
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.112 seconds