Linuxcnc 2.9.7 - Mesa 5i25 with HKD 5 AXIS MACH3 STEPPER I/FACE and 5i25_5ABOBx2

10 months 3 days ago #340696 by Ozcnc

Replied by Ozcnc on topic Linuxcnc 2.9.7 - Mesa 5i25 with HKD 5 AXIS MACH3 STEPPER I/FACE and 5i25_5ABOBx2

Bob has 5v using usb.
I'm only working with 5v now to get step/dir outputs working.
I will connect the 12v supply to run the spindle.

Please Log in or Create an account to join the conversation.

10 months 1 day ago #340759 by Ozcnc

Replied by Ozcnc on topic Linuxcnc 2.9.7 - Mesa 5i25 with HKD 5 AXIS MACH3 STEPPER I/FACE and 5i25_5ABOBx2

I've ordered a MESA 7i76U, should get the machine up and running once configured.

I'm going to park this one.

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.197 seconds