proudly presenting a Maho MH700 retrofit ..

here is the picture image missing http://www.linuxcnc.org/media/kunena/attachments/legacy/images/wiring_.jpg

Thanks a lot, this is very usefull

Hi everybody,

we bought a MAHO 1000 C and want to do a Retrofit.
Could anyone Provide some Config and INI Files?
Is there a way to get some wiring plans? Maybe we can buy the documentation from somebody who already did an retrofit?

Thank you in advance and best regards

Leopold Schmidt

info@escnc.de

Hi there, So i have done the same conversion on my 700c, I replaced all the scales except the B axis seeing that it's a Heidenheime scale. Any change you perhaps still have the HAL file. the Software side has stumped me and I am not sure how to start or setup the scales etc.
Delos W series scales used
5i25T
7i77 for the scale inputs and the 3trm2 and B axis
7i84 for the 24V relays and inputs

Hi
The machine is sold, but I have the config data.you can download it to the attachment.
/ulda

Hi there. Any chance you still have your ini or HAL?

I’m having issues with my 4 axis with when I release the clamps the table “bumps” abit and then goes into joint error. I’m also not fining any Info on the scale settings for it.