Gecko Motors Curves

23 Oct 2012 19:04 #25698 by diegoroman17

Gecko Motors Curves was created by diegoroman17

Hi,

Any person know where I can to find the curve velocity vs torque for Gecko stepper motor?

Thanks

Please Log in or Create an account to join the conversation.

25 Oct 2012 18:42 #25794 by BigJohnT

Replied by BigJohnT on topic Gecko Motors Curves

I assume you looked on the Gecko web site so I'd email Gecko and ask Maris.

John

Please Log in or Create an account to join the conversation.

25 Oct 2012 23:11 #25816 by diegoroman17

Replied by diegoroman17 on topic Gecko Motors Curves

I have consulted in the web page gecko but this info is not available. I have write a email to Gecko but don't respond.

Please Log in or Create an account to join the conversation.

26 Oct 2012 00:12 #25819 by BigJohnT

Replied by BigJohnT on topic Gecko Motors Curves

Try the http://www.cnczone.com/forums/gecko_drives/

John

Please Log in or Create an account to join the conversation.

27 Oct 2012 04:00 #25858 by diegoroman17

Replied by diegoroman17 on topic Gecko Motors Curves

Now I need speed-torque curve of G723-400-4 motor. I've subscribed has cnczone because don't have response of gecko I don't know why?

Please Log in or Create an account to join the conversation.

Moderators: cncbasher

Time to create page: 0.108 seconds