Interesting videos about robotics
- Mike_Eitel
- Topic Author
- Offline
- Platinum Member
Less
More
- Posts: 1150
- Thank you received: 184
04 Jun 2017 20:45 #94058
by Mike_Eitel
Interesting videos about robotics was created by Mike_Eitel
I myself are not in robotics and it is not lcnc.
But saw some nice youtube that might help somebody.
Mike
But saw some nice youtube that might help somebody.
Mike
The following user(s) said Thank You: bymccoy
Please Log in or Create an account to join the conversation.
- tommylight
- Away
- Moderator
Less
More
- Posts: 19123
- Thank you received: 6406
04 Jun 2017 21:33 #94061
by tommylight
Replied by tommylight on topic Interesting videos about robotics
That looks like KUKA, installed, modified, wired, programed etc, plenty of them. The only thing i did not like on them is windoze, a striped down tailor made for them, but still windoze! Had only one incident regarding that, froze completely, had to switch it off and on again, while i was changing some machine settings! Worked OK after power cycle.
Otherwise they are magnificent pieces of technology and the overall quality is top notch. No wonder you see them by the hundreds in factories all over the world.
Otherwise they are magnificent pieces of technology and the overall quality is top notch. No wonder you see them by the hundreds in factories all over the world.
Please Log in or Create an account to join the conversation.
Moderators: cncbasher
Time to create page: 0.173 seconds