MPS MicroMill 2000HD/LE

Yeah I found a tutorial on youtube about VFD and adding a filter on the power supply to the VFD and Ferrite Transformer Cores on the lead from the VFD to the motor.



I will also check the earths as Tommy suggested because I am sure when I first used it I didn't have the issue but maybe wiring in the variable pot I caused an issue with the earth.

Or thinking about it putting the controller up on the machine the proximity being closer that is causing it.

Just a follow up.

I did do the filter on the power supply to the VFD and Ferrite Transformer Cores on the lead to my controller and it works flawlessly now.

Glad you got it squared out and thank you for reporting back with the solution.

I edited this as I resolved my own questions...

Well it's been a few years and I have managed to machine a fair few projects. I have gradually increased my skill level but I know am at a point I need to do tool changes.

I have done it... I got a Automatic Tool Sensor from Aliexpress and I managed to setup the whole thing and works like a charm.