my new CNC machine

More
09 Jan 2021 09:00 #194572 by sibelius
Replied by sibelius on topic my new CNC machine
Hi
Thank you for your answer
At the link you provide is out of stock but I will keep one eye on.
at this link
store.mesanet.com/index.php?route=produc...oduct&product_id=290
the method of shipping available is "softly" high.
If you feel like you can check.
I don't exclude the possibility of a mistake of mine.

Regards,
V.

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 11:15 #194578 by rodw
Replied by rodw on topic my new CNC machine
Hi, I'm in Australia too and have purchased from both suppliers a few times. More recently I've dealt with Mesa direct. I personally think that their shipping prices are quite reasonable. Not only that, they sometimes upgrade my shipping from UPS which are my least preferred carrier to Fedex which are much more professional and faster.

UPS have some fixed rate international prepaid cartons out of the US but their customs clearance in AU is awful.

Sometimes I have a card or two lying around and have helped out another Aussie but I have to replace them so its not any cheaper and I have to account for GST which you won't pay if you deal direct.

One day I might carry some CNC stuff as I run an ecommerce store so shipping is easy but right now its not core business so I can't justify holding the inventory. That may change one day...

You can find me here www.vmn.com.au/
The following user(s) said Thank You: sibelius

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 11:42 #194583 by sibelius
Replied by sibelius on topic my new CNC machine
Hi
Thank you very much for you reply Mr Rod.
Tomorrow with a clear mind I will try to contact them.
My issue arise when at the check out I have an extra charge for shipping that is over 200 US dollars.
I will have a close look after a night sleep.
Thanks again for your precious help

Regards,
V.
The following user(s) said Thank You: rodw

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 12:15 #194584 by rodw
Replied by rodw on topic my new CNC machine
Something wrong there, my last order for USD $900 odd cost USD $87 for shipping

Please Log in or Create an account to join the conversation.

More
10 Jan 2021 01:17 #194664 by Benb
Replied by Benb on topic my new CNC machine
An other alternative supplier from the US is BigJohnT online store:
www.mesaus.com
The following user(s) said Thank You: sibelius

Please Log in or Create an account to join the conversation.

More
11 Jan 2021 11:22 #194879 by sibelius
Replied by sibelius on topic my new CNC machine
Thank you to everyone
I manage to purchase the board.

Please Log in or Create an account to join the conversation.

Moderators: cncbasher
Time to create page: 0.275 seconds
Powered by Kunena Forum