LPKF ProtoMat S62 Retrofit Advice
- kevinl8890
-
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
07 May 2022 06:55 #242209
by kevinl8890
Replied by kevinl8890 on topic LPKF ProtoMat S62 Retrofit Advice
If you are interested in LPKF ProtoMat unofficial 3rd party application just join
www.facebook.com/groups/lpkfuserclub
www.facebook.com/groups/lpkfuserclub
Please Log in or Create an account to join the conversation.
20 Feb 2023 17:03 - 21 Feb 2023 02:29 #264883
by Iron-Man
Replied by Iron-Man on topic LPKF ProtoMat S62 Retrofit Advice
Hello maltandmake !
I have a C30. I am thinking about replacing the motors with AC servos and using LinuxCNC or Pathpilot for the control. I would use a 7i77 and 6i25 or 7i76 for step direction.
I did come across this on Hackaday: hackaday.io/project/175303-refurbishing-lpkf-protomat-c20
Have you made any further progress?
Thanks,
Iron-Man
I have a C30. I am thinking about replacing the motors with AC servos and using LinuxCNC or Pathpilot for the control. I would use a 7i77 and 6i25 or 7i76 for step direction.
I did come across this on Hackaday: hackaday.io/project/175303-refurbishing-lpkf-protomat-c20
Have you made any further progress?
Thanks,
Iron-Man
Last edit: 21 Feb 2023 02:29 by Iron-Man. Reason: 7i76 step/direction.
Please Log in or Create an account to join the conversation.
- Viperking227
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
29 May 2023 04:28 #272399
by Viperking227
Replied by Viperking227 on topic LPKF ProtoMat S62 Retrofit Advice
Hey - just wondering if anyone got any further with this? I can get generic stuff milled using board master.
Please Log in or Create an account to join the conversation.
Moderators: cncbasher
Time to create page: 0.060 seconds