Options for glass scale retrofit - component selection
23 Jun 2022 21:01 #245724
by scotth
Replied by scotth on topic Options for glass scale retrofit - component selection
I agree with Henk. Mag scales are far more reliable. If you run coolant or in a dusty environment, there is no choice.
I'm sure you can find something closer to home than this.
dropros.com/DRO_PROS_Digital_Readout_Magnetic_Scale.htm
I'm sure you can find something closer to home than this.
dropros.com/DRO_PROS_Digital_Readout_Magnetic_Scale.htm
Please Log in or Create an account to join the conversation.
- P1-Engineering
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 8
18 Jul 2022 10:14 #247649
by P1-Engineering
Replied by P1-Engineering on topic Options for glass scale retrofit - component selection
Thanks!. Didn't know that these existed.
It can surely be dusty since I also machine fibre materials.
Will do some research on what's available in Europe!
It can surely be dusty since I also machine fibre materials.
Will do some research on what's available in Europe!
Please Log in or Create an account to join the conversation.
21 Jul 2022 09:32 #247924
by andypugh
Replied by andypugh on topic Options for glass scale retrofit - component selection
You could try www.machine-dro.co.ukWill do some research on what's available in Europe!
Please Log in or Create an account to join the conversation.
Moderators: cncbasher
Time to create page: 0.187 seconds