sinmerik 820
- omarF8985
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
26 Jul 2022 22:12 - 27 Jul 2022 10:16 #248373
by omarF8985
sinmerik 820 was created by omarF8985
I have a CNC lathe with the Sinumerik 820 command, it hasn't worked for two years.
When I turn on the machine, the fan in the electrical cabinet and the control comes on but nothing happens, the control panel and the screen do not light up.
Help me please.
Thanks.
youtube.com/shorts/OaOPtwbc3ok
When I turn on the machine, the fan in the electrical cabinet and the control comes on but nothing happens, the control panel and the screen do not light up.
Help me please.
Thanks.
youtube.com/shorts/OaOPtwbc3ok
Last edit: 27 Jul 2022 10:16 by omarF8985.
Please Log in or Create an account to join the conversation.
- Todd Zuercher
-
- Offline
- Platinum Member
-
Less
More
- Posts: 5009
- Thank you received: 1443
27 Jul 2022 15:09 #248424
by Todd Zuercher
Replied by Todd Zuercher on topic sinmerik 820
Start by checking fuses, then power supplies.
Please Log in or Create an account to join the conversation.
- radom
- Offline
- Senior Member
-
Less
More
- Posts: 58
- Thank you received: 6
27 Jul 2022 15:35 #248428
by radom
Replied by radom on topic sinmerik 820
have you tried pressing the green button under the red/yellow estop button?
Please Log in or Create an account to join the conversation.
- omarF8985
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
28 Jul 2022 08:37 #248516
by omarF8985
Replied by omarF8985 on topic sinmerik 820
yes, it dosn't work.
Please Log in or Create an account to join the conversation.
Time to create page: 0.073 seconds