CimatronE & ArtCAM Post-processor

More
10 years 7 months ago - 10 years 7 months ago #72242 by TurBoss
CimatronE & ArtCAM Post-processor was created by TurBoss
Hi

I made a post processor for CimatronE can be fond at github.com/TurBoss/LinuxCNCGPP2POST

not perfect yet pull request are wellcome :)

and found a postprocessor for ArtCAM

edit: oly tested in 2.7
Attachments:
Last edit: 10 years 7 months ago by TurBoss.

Please Log in or Create an account to join the conversation.

More
9 years 8 months ago #87819 by MarcoGaspar
Replied by MarcoGaspar on topic CimatronE & ArtCAM Post-processor
Hello,

It's possible to post drill cycle only with lines? (Whithout cycle G83)

Please Log in or Create an account to join the conversation.

More
9 years 8 months ago #87821 by TurBoss
Replied by TurBoss on topic CimatronE & ArtCAM Post-processor
Hello:

this is a gcode example generated with the spot drill option
Code:
G98 X-198 Y-211.828 Z-2.25 R-0.5 F350 X-211.828 Y-198 X-198 Y-176 X-211.828 Y-154 X-198 Y-132 X-211.828 Y-110 X-198 Y-88 X-211.828 Y-66 X-198 Y-44 G80

what drill cycle type are you using?

Thanks

Please Log in or Create an account to join the conversation.

More
9 years 8 months ago #87840 by MarcoGaspar
Replied by MarcoGaspar on topic CimatronE & ArtCAM Post-processor
Linuxcnc recognize G98 X-198 Y-211.828 Z-2.25 R-0.5 F350 as a drill cycle?

Please Log in or Create an account to join the conversation.

More
9 years 8 months ago #87841 by MarcoGaspar
Replied by MarcoGaspar on topic CimatronE & ArtCAM Post-processor
Never mind i see that linuxcnc accept G83 Peck Drilling Cycle :D :D

Please Log in or Create an account to join the conversation.

More
9 years 8 months ago #87859 by TurBoss
Replied by TurBoss on topic CimatronE & ArtCAM Post-processor
Okay the example Ive put is wrong... :\

I need help to figure what gcodes match this descriptions



Thanks
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.508 seconds
Powered by Kunena Forum