CimatronE & ArtCAM Post-processor

9 years 8 months ago #87862 by MarcoGaspar

Replied by MarcoGaspar on topic CimatronE & ArtCAM Post-processor

Hello,

The codes i have in my cim post

Attachments:

Please Log in or Create an account to join the conversation.

9 years 8 months ago #87864 by TurBoss

Replied by TurBoss on topic CimatronE & ArtCAM Post-processor

Thank you so much

The following user(s) said Thank You: MarcoGaspar

Please Log in or Create an account to join the conversation.

9 years 3 months ago #96811 by FraggaMuffin

Replied by FraggaMuffin on topic CimatronE & ArtCAM Post-processor

MarcoGaspar wrote: Hello,

It's possible to post drill cycle only with lines? (Whithout cycle G83)

You can check this out: github.com/fragmuffin/pygcode/wiki/Scrip...cycle-simplification
This python script converts canned drilling cycles (G73,G76,G81,G82,G83,G85,G89) to their linear equivalents (G0,G1,G4)... among other things

Please Log in or Create an account to join the conversation.

Time to create page: 0.249 seconds