I Made a CAM Program for My Lathe (AI Made It)*
- Dudelbert
- Offline
- Premium Member
-
Less
More
- Posts: 84
- Thank you received: 27
16 Nov 2026 17:05 #350760
by Dudelbert
Replied by Dudelbert on topic I Made a CAM Program for My Lathe (AI Made It)*
First of all, thanks for the kind words! I was a little worried that I might get some grief for having made this with AI, but so far that doesn't seem to be the case.
Regarding threading, what exactly are the capabilities you would like to see?
I hadn't considered tapered threads at all, but I've received feedback that this is a missing feature.
As I understand it, this should be possible using a G33 spindlesynchronised move. I don't have any first-hand experience with this, but I think it should be possible to implement most of the G76 functionality, more or less, while also allowing for a taper.
Would that cover what you're looking for?
I'm happy to implement new features, but adding functionality that I don't fully understand or have any experience using will leads to poor usability, or worse.
Regarding threading, what exactly are the capabilities you would like to see?
I hadn't considered tapered threads at all, but I've received feedback that this is a missing feature.
As I understand it, this should be possible using a G33 spindlesynchronised move. I don't have any first-hand experience with this, but I think it should be possible to implement most of the G76 functionality, more or less, while also allowing for a taper.
Would that cover what you're looking for?
I'm happy to implement new features, but adding functionality that I don't fully understand or have any experience using will leads to poor usability, or worse.
Please Log in or Create an account to join the conversation.
Time to create page: 0.580 seconds