Learning Linuxcnc file structures and interaction

Start
Prev
1
Next
End

bkt
Topic Author
Offline
Platinum Member

31 May 2017 11:06 - 31 May 2017 11:15 #93870 by bkt

Learning Linuxcnc file structures and interaction was created by bkt

Today during occasional google search I found these ....

mdi-stream -- nairobi
learn NML -- nairobi

Thanks to the site mantainer ..

giorgio

Last edit: 31 May 2017 11:15 by bkt.

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

jawneelogik
Offline
New Member

15 May 2018 12:24 #110758 by jawneelogik

Replied by jawneelogik on topic Learning Linuxcnc file structures and interaction

giorgio,

Looks like someone forgot to renew their domain. The link is broken.

Please Log in or Create an account to join the conversation.

bkt
Topic Author
Offline
Platinum Member

28 Jun 2018 16:49 #112993 by bkt

Replied by bkt on topic Learning Linuxcnc file structures and interaction

i see ... but nairobi is not my domain ... if you would I sear the page in my hard drive and publish it on these post. But not sure these is well see from the autor .... I think the best is ask the page directly to developper .... for sure someone can publish something readable ....

Regards
giorgio

Please Log in or Create an account to join the conversation.

bkt
Topic Author
Offline
Platinum Member

28 Nov 2018 10:12 #121520 by bkt

Replied by bkt on topic Learning Linuxcnc file structures and interaction

an other link about (very tanks to dynomotion)

dynomotion.com/Help/GCodeScreen/EMC_Handbook/node109.html

dynomotion.com/Help/GCodeScreen/EMC_Handbook/node24.html#612

regards

Please Log in or Create an account to join the conversation.

pl7i92
Offline
Platinum Member

15 Dec 2018 14:43 #122447 by pl7i92

Replied by pl7i92 on topic Learning Linuxcnc file structures and interaction

Best is to Dive into it
Start on Wizard and go line by line
ASK IRC Helpchannel #lLnuxcnc on Freenode

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: HansU

Time to create page: 0.074 seconds