Fixing the F**king Forum Editor

More
3 years 11 months ago #258027 by Bari
Fixing the F**king Forum Editor was created by Bari
Is it possible to choose a different editor for forum comments to something that actually works vs everyone just hating the current one?
The following user(s) said Thank You: macsddau@linuxcnc

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #258028 by phillc54
Replied by phillc54 on topic Fixing the F**king Forum Editor
+1
The following user(s) said Thank You: macsddau@linuxcnc

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #258032 by Bari
Replied by Bari on topic Fixing the F**king Forum Editor
The only thing missing to make it more aggravating is a time out feature so after 5+ tries to properly format your post, it timed you out without warning and you have to start all over again.

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #258036 by tommylight
Replied by tommylight on topic Fixing the F**king Forum Editor
It already does that, but sneakier:
-Type a long message
-attach files
-it complains file to big
-click on remove the offending picture
Tadaaaa everything is deleted! Text included! :)

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #258039 by Bari
Replied by Bari on topic Fixing the F**king Forum Editor
Can this be fixed? i think we all agree that the current forum editor should be replaced with something that actually works well.

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #258041 by tommylight
Replied by tommylight on topic Fixing the F**king Forum Editor
Probably not, i know BigJT did try several times.
I think since it is part of the CMS (content management system) until someone developing it does something about it, we are screwed.
Since quite some time has passed from the first reports on the Kunena forums, i think we are in for a long winter.
The following user(s) said Thank You: JT

Please Log in or Create an account to join the conversation.

Time to create page: 0.234 seconds
Powered by Kunena Forum