tb6560 can I use another axis
14 Feb 2016 15:14 #70111
by okiejim
tb6560 can I use another axis was created by okiejim
My bad,
I blew out my z axis on a 4 axis blue tb6560. Can I use the c axis as a z axis port by
re-assigning it thru linuxcnc? i saw the chips on line could I just buy a new chip
to do the repair? As you can see I am new to this. I had my wires crossed and
the driver chip went pop real loud. Is that all that went bad with it? Thank for any
help
Jim
I blew out my z axis on a 4 axis blue tb6560. Can I use the c axis as a z axis port by
re-assigning it thru linuxcnc? i saw the chips on line could I just buy a new chip
to do the repair? As you can see I am new to this. I had my wires crossed and
the driver chip went pop real loud. Is that all that went bad with it? Thank for any
help
Jim
Please Log in or Create an account to join the conversation.
14 Feb 2016 15:44 #70114
by BigJohnT
Replied by BigJohnT on topic tb6560 can I use another axis
I don't see why not... it's just another step/direction output.
JT
JT
The following user(s) said Thank You: okiejim
Please Log in or Create an account to join the conversation.
14 Feb 2016 17:54 #70124
by okiejim
Replied by okiejim on topic tb6560 can I use another axis
Yep
I answered my own question thank you for the response. I am learning alot. I went ahead and did it and I am working again just down one axis that I don't need at this time. Almost done with my first cnc build. Wish Id of did more research before I started but I will have a machine to play with real soon. Thank you again. Sorry for the dumb question.
I answered my own question thank you for the response. I am learning alot. I went ahead and did it and I am working again just down one axis that I don't need at this time. Almost done with my first cnc build. Wish Id of did more research before I started but I will have a machine to play with real soon. Thank you again. Sorry for the dumb question.
Please Log in or Create an account to join the conversation.
14 Feb 2016 23:16 #70134
by BigJohnT
Very few question are "dumb" if you don't know how you ask and learn. My daughter did ask me a dumb question once lol.
JT
Replied by BigJohnT on topic tb6560 can I use another axis
Sorry for the dumb question.
Very few question are "dumb" if you don't know how you ask and learn. My daughter did ask me a dumb question once lol.
JT
Please Log in or Create an account to join the conversation.
Time to create page: 0.096 seconds