Forum Menu

Missing Hm2_eth. Trying to connect to a 7i96

More
8 years 6 months ago #109978 by dbanks
Missing Hm2_eth. Trying to connect to a 7i96 was created by dbanks
Can't seem to locate hm2_eth. Also won't let me use mesaflash as a command. I'm on RTAI. We have the board connected, but not really making any progress in any direction with LinuxCNC. Has anyone had these same issues?

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago #109980 by dgarrett
Replied by dgarrett on topic Missing Hm2_eth. Trying to connect to a 7i96
Code:
$ man hm2_eth ... hm2_eth is only available when linuxcnc is configured with "uspace" realtime. ...

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago #109996 by PCW
Replied by PCW on topic Missing Hm2_eth. Trying to connect to a 7i96
Probably the easiest way to get the uspace version of LinuxCNC and the proper kernel is to install the
LinuxCNC Debian Stretch test ISO:

www.linuxcnc.org/testing-stretch-rtpreempt/

Please Log in or Create an account to join the conversation.

Time to create page: 0.310 seconds
Powered by Kunena Forum