G code G05.1 B spline, G05.2 and G05.3 NURBS interpolation any progress?

andrej2112
Topic Author
Offline
New Member

6 years 7 months ago #159193 by andrej2112

G code G05.1 B spline, G05.2 and G05.3 NURBS interpolation any progress? was created by andrej2112

Is any chance to get ful support for splines and nurbs in linuxcnc, but for all axis?

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

6 years 7 months ago #159215 by cmorley

Replied by cmorley on topic G code G05.1 B spline, G05.2 and G05.3 NURBS interpolation any progress?

There has been no talk of work on nurbs. The existing work was (IIRC) done at a university and given to back linuxcnc.

You would need to find someone to spearhead the work.

Chris

Please Log in or Create an account to join the conversation.

andrej2112
Topic Author
Offline
New Member

6 years 7 months ago #159259 by andrej2112

Replied by andrej2112 on topic G code G05.1 B spline, G05.2 and G05.3 NURBS interpolation any progress?

ok, thanks,
any idea who might do the work, any one here on forum maybe?

andrej

Please Log in or Create an account to join the conversation.

Time to create page: 0.259 seconds