Linuxcnc controling TinyG (Alterative to Chilipeppr)
- ynneb
- Offline
- New Member
-
Less
More
- Posts: 19
- Thank you received: 0
27 Apr 2020 03:40 - 27 Apr 2020 03:43 #165748
by ynneb
Linuxcnc controling TinyG (Alterative to Chilipeppr) was created by ynneb
Is there plans for Linuxcnc to be able to control cards like a TinyG?
This would be a great alternative to using Chilipeppr that requires the user to be connected to the internet.
This would be a great alternative to using Chilipeppr that requires the user to be connected to the internet.
Last edit: 27 Apr 2020 03:43 by ynneb.
Please Log in or Create an account to join the conversation.
- phillc54
-
- Offline
- Platinum Member
-
Less
More
- Posts: 5714
- Thank you received: 2090
27 Apr 2020 05:34 #165754
by phillc54
Replied by phillc54 on topic Linuxcnc controling TinyG (Alterative to Chilipeppr)
I wouldn't think so, LinuxCNC doesn't stream GCode, it reads Gcode interprets it and is the motion controller as well.
Please Log in or Create an account to join the conversation.
Time to create page: 0.050 seconds