Program will not start
- allenwg2005
-
Topic Author
- Offline
- Elite Member
-
Less
More
- Posts: 310
- Thank you received: 4
12 Aug 2020 01:00 #177973
by allenwg2005
Program will not start was created by allenwg2005
Hi Folks,
It's been years sense I needed help but I screwed things up and my LinuxCNC Axis program will not start now.
I hope it's OK to post this question here, if I messed that up I apologize in advance.
Can someone help me sort this problem
Thank you so much.
It's been years sense I needed help but I screwed things up and my LinuxCNC Axis program will not start now.
I hope it's OK to post this question here, if I messed that up I apologize in advance.
Can someone help me sort this problem
Thank you so much.
Attachments:
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19504
- Thank you received: 6540
13 Aug 2020 07:13 #178075
by tommylight
Replied by tommylight on topic Program will not start
From your error log :They all point to a permission problem with one of the files needed.
A wild guess would be that "sudo" was used where it was not supposed to during installation, so you might want to go through the installations steps again and check that.
andEmbeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u python/probe_screen.py -x 73400499 python/probe_icons/probe_screen.glade" exited with error: 1
Can not find -sec APPLICATIONS -var DELAY -num 1
I/O error : Permission denied
I/O error : Permission denied
I/O warning : failed to load external entity "python/probe_icons/probe_screen.glade"A wild guess would be that "sudo" was used where it was not supposed to during installation, so you might want to go through the installations steps again and check that.
The following user(s) said Thank You: allenwg2005
Please Log in or Create an account to join the conversation.
- allenwg2005
-
Topic Author
- Offline
- Elite Member
-
Less
More
- Posts: 310
- Thank you received: 4
16 Aug 2020 17:01 #178413
by allenwg2005
Replied by allenwg2005 on topic Program will not start
Tommy, Thanks for the direction, that helped me solve this one.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19504
- Thank you received: 6540
16 Aug 2020 17:06 #178414
by tommylight
Replied by tommylight on topic Program will not start
You are welcomed, always.
Please Log in or Create an account to join the conversation.
Time to create page: 0.087 seconds