Suggested Post Processor for Precix 5100 with Mesa controller
- quarklark
-
Topic Author
- Offline
- New Member
-
Less
More
- Posts: 9
- Thank you received: 0
11 Nov 2020 16:28 #189015
by quarklark
Suggested Post Processor for Precix 5100 with Mesa controller was created by quarklark
I'm looking for a Post Processor file to use with our Precix 5100 CNC, but I can't find anything on the Precix site. Is there a generic / suggested one?
This is our machine: github.com/quarklark/GSS-CNC/wiki/machine-specifications
This is our machine: github.com/quarklark/GSS-CNC/wiki/machine-specifications
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19499
- Thank you received: 6538
13 Nov 2020 23:28 #189272
by tommylight
Replied by tommylight on topic Suggested Post Processor for Precix 5100 with Mesa controller
Checked again, but there is no useful info there.
Try:
Inkscape
BlenderCAM
FreeCAD
PyCAM
NCAM or NativeCAM that is an add on for LinuxCNC
Try:
Inkscape
BlenderCAM
FreeCAD
PyCAM
NCAM or NativeCAM that is an add on for LinuxCNC
Please Log in or Create an account to join the conversation.
Time to create page: 0.058 seconds