XHC-WHB04B-6 - Handwheel doesn´t respond

More
04 Mar 2021 21:39 #201053 by Cadic
Hi there.

I´ve got problem with hxc-whb04b-6 handwheel. I try install it according to the instruction from video
of talla83 (
) - everything goes well, but at the end, if I
try to start LinuxCNC, 95 percent of lines report an error - halui.machine.on does not exist, halui.mode.is-manual
does not exist etc.etc.etc.)

So I try to remove that halui line and LinuxCNC works, but handwheel not.

In hal configuration every single button works red/yellow light, but only jog counts not. If i try in terminal command
xhc−whb04b−6 −ue , everything respond. But if I start linuxcnc, handwheel does nothing. On handwheel display I can
change axes etc. but machine doesn´t move.

I attach my files below.

Can someone please help me? Thanks.

File Attachment:

File Name: Router_1.hal
File Size:4 KB

File Attachment:

File Name: Router_1.ini
File Size:3 KB

File Attachment:

File Name: xhc_whb.hal
File Size:12 KB
Attachments:

Please Log in or Create an account to join the conversation.

More
04 Mar 2021 22:20 #201064 by newbynobi
As your first counts goes only to axis counts and not also to joint counts, you will only be able to jog your Machine after homing, as prior to all homed axis counts are ignored.

Norbert

Please Log in or Create an account to join the conversation.

More
04 Mar 2021 22:40 #201065 by Cadic
Hi Norbert, thanks for answer, but machine does not react after homing too.

Please Log in or Create an account to join the conversation.

More
04 Mar 2021 22:41 - 04 Mar 2021 22:41 #201066 by Hakan
You can not change those 20 first lines, they must work.
Don't take the pins away from the signals and expect it to work.
There was a case just the other day here.
Rename the signal net.machine-on to net-machine-on.
Then, which is the next one that gives an error?
Copy that error here
Last edit: 04 Mar 2021 22:41 by Hakan.

Please Log in or Create an account to join the conversation.

More
05 Mar 2021 08:26 #201083 by Cadic
Hello Hakan,

if I use - hal example from - linuxcnc.org/docs/2.8/html/man/man1/xhc-whb04b-6.1.html

I have this error on 95 percent of lines. - ./xhc_whb.hal:x: Pin halui.xxx.xxx does not exist

I will be very grateful for any advice.

File Attachment:

File Name: xhc_whb_20...3-05.hal
File Size:8 KB

File Attachment:

File Name: Error.txt
File Size:5 KB
Attachments:

Please Log in or Create an account to join the conversation.

More
05 Mar 2021 09:32 #201086 by tecno
It looks like you do not have any signal for machine on/enabled in your router_1.hal

Please Log in or Create an account to join the conversation.

More
05 Mar 2021 10:38 #201096 by Cadic
And please how can I fix that? Im total Linux noob, so I dont know how to create this signal.

Thanks

Please Log in or Create an account to join the conversation.

More
08 Mar 2021 14:01 #201428 by Cadic
Please, can anyone advise? I can't solve it myself.

Please Log in or Create an account to join the conversation.

More
08 Mar 2021 18:47 #201464 by andypugh

I have this error on 95 percent of lines. - ./xhc_whb.hal:x: Pin halui.xxx.xxx does not exist


It sounds like you are not loading halui.

linuxcnc.org/docs/2.8/html/config/ini-config.html#_hal_section

At the bottom of the [HAL] section is the required stanza that needs to be in your iNI file, and a link to further docs.
[HAL]
HALUI = halui

Please Log in or Create an account to join the conversation.

More
08 Mar 2021 19:12 #201469 by Cadic
Oh my god, it work!

Thank you all very much for your help. You're amazing!

Please Log in or Create an account to join the conversation.

Time to create page: 0.257 seconds
Powered by Kunena Forum