Forum Menu

SoE Ethercat

More
5 years 3 months ago #215959 by TheRoslyak
SoE Ethercat was created by TheRoslyak
Hi everyone
I corresponded with enginer of Hungary company NCT.
They used SoE protocol to sent Ethercat package. (IDN S-0-0134 is controlworld and etc.)
It is new for me. Do is suporting linuxcnc this protocole?

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #215988 by rollfree
Replied by rollfree on topic SoE Ethercat
Yes. With EtherCAT master package from IgH.

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #216037 by TheRoslyak
Replied by TheRoslyak on topic SoE Ethercat
Thanks for the detailed answer.
I wanted to get configuration examples, but already found it myself
The following user(s) said Thank You: HalaszAttila

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago - 5 years 3 months ago #216087 by rollfree
Replied by rollfree on topic SoE Ethercat
The question was if LinuxCNC supports EtherCAT SoE.
The answer was 'yes', and what else would need to be installed on LinuxCNC.
So why sarcasm?
Last edit: 5 years 3 months ago by rollfree.

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #216216 by kubabuda
Replied by kubabuda on topic SoE Ethercat
SoE as SERCOS over EtherCAT? Where can I find example Linux CNC setup for those? So far I have seen only CoE with CiA402 profile for motion control.

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #216220 by rollfree
Replied by rollfree on topic SoE Ethercat

SoE as SERCOS over EtherCAT? Where can I find example Linux CNC setup for those? So far I have seen only CoE with CiA402 profile for motion control.
 
For example:
docs.google.com/document/d/1GiB065ZIAaoM...n-19xGQl2X9DM9-THNM/
The following user(s) said Thank You: kubabuda

Please Log in or Create an account to join the conversation.

Time to create page: 0.452 seconds
Powered by Kunena Forum