Subroutine error

It looks like the problem might well be the lack of an M2 at the end of the subs.

andypugh wrote:

It looks like the problem might well be the lack of an M2 at the end of the subs.

I can most certainly add M2 to the end and see if it makes a difference, but none of my other subs have it and they work fine all the time.   I will try and report back,   Thanks

Sorry for the lapse in replies.
Adding M2 to the end of my subroutine had no effect on my issue.

in the ini file
OPEN_FILE = /home/probotix/Desktop/Warmup Routine.ngc

having spaces in .ngc files could cause problems...

in o100 SUB
o101 if [#1 NE #5400]

but after start, maybe there is no tool in spindle, #5400 , and then further down the routine, P#1 must be a valid toolnumber from tooltable
G10 L11 P#1 Z0 R0

i think you need to exclude read this when loading, with something like

   o800 IF     [#<_task> EQ 0]
   o800        RETURN [99]
   o800 ENDIF