Forum Menu

Install Spindle Encoder on Sherline CNC Lathe

More
4 years 5 months ago #242414 by tomdean
Install Spindle Encoder on Sherline CNC Lathe was created by tomdean
I am new here and with the lathe and CNC.
I have a Sherline CNC Lathe with a computer/controller from Sherline.
I want to attach an encoder, Omron, to the spindle. The encoder has A,B and Index outputs. I believe 100ppr.
Has anyone done this?
Tom Dean

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #242535 by andypugh
Replied by andypugh on topic Install Spindle Encoder on Sherline CNC Lathe
Yes, you can see the Omron encoder in the corner of the shot here:

Please Log in or Create an account to join the conversation.

Time to create page: 0.229 seconds
Powered by Kunena Forum