7i76e I/O disapeared
- furynick
- Offline
- Junior Member
-
Less
More
- Posts: 32
- Thank you received: 8
12 Sep 2022 20:09 #251762
by furynick
7i76e I/O disapeared was created by furynick
I'm in strange trouble, LinuxCNC not starting anymore with following error :
Ooznest.hal:28: Pin 'hm2_7i76e.0.7i76.0.0.output-00' does not exist
I only replaced my spindle since last time it worked.
Ooznest.hal:28: Pin 'hm2_7i76e.0.7i76.0.0.output-00' does not exist
I only replaced my spindle since last time it worked.
Please Log in or Create an account to join the conversation.
- furynick
- Offline
- Junior Member
-
Less
More
- Posts: 32
- Thank you received: 8
12 Sep 2022 20:11 #251763
by furynick
Replied by furynick on topic 7i76e I/O disapeared
The complete report can be dl here :
cloud.furyweb.fr/index.php/s/JsKT6x6T56TpCWM
cloud.furyweb.fr/index.php/s/JsKT6x6T56TpCWM
Please Log in or Create an account to join the conversation.
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 17950
- Thank you received: 4817
12 Sep 2022 20:12 #251764
by PCW
Replied by PCW on topic 7i76e I/O disapeared
This likely means a problem with power to the field I/O section of the 7I76E
(orange connector)
(orange connector)
Please Log in or Create an account to join the conversation.
- furynick
- Offline
- Junior Member
-
Less
More
- Posts: 32
- Thank you received: 8
13 Sep 2022 04:33 #251787
by furynick
Replied by furynick on topic 7i76e I/O disapeared
I'm so stupid. I disconnected power to test spindle without powering anything else.
Problem solved, many thanks.
Problem solved, many thanks.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Time to create page: 0.081 seconds