Gscreen GUI coolant help request

All,
I've modified my Gscreen interface and added a toggle button so I can turn the flood coolant on and off while running a program. While in MANUAL or MDI mode, the button functions fine but as soon as I go into AUTO mode, the toggle button does not function any longer.....any help would be greatly appreciated.

Thanks
Jeff

Can you confirm at coolant state can actually be changed during auto mode in linuxcnc? I cant remember.

Does the button become disabled or works but just doesn't turn coolant on/off?

Coolant state can be changed in auto, I confirmed.
What did you add to control the coolant.

Hi Chris,
I spent more time with it yesterday and I found that by moving the
toggle buttons to another part of the screen , the functions worked
like I expected, I couldnt figure out why though.My user interface began
lif as Gscreen Industrial and its been modified quite a bit over the years.
I could have written something over time that made those toggles
work incorrectly. If I ever find out why Ill post again so if other run into it
they'll know what happened.

Thanks for spending the time to get involved, I appreciate it.

Jeff