Parallel Port Cards (on the cheap!)

I am about to install LinuxCNC but no longer have a pc with a DP25 port. I understand most cards to add a DP25 are not suitable. So my question is, for a money-challenged starter like me, how can I check a card on Aliexpress (eg) will work? Many, many thanks for any help and apologies if this is addressed somewhere here.

NetMOS ans MOSChip chipsets worked for me always for PCI cards.
Avoid the cards with a very small chip.

Many thanks for your help. I can't (immediately) find a card that mentions either technology. The one I had my miserly eye on mentions "AX99100 Chip"
I googled it and its spec looks impressive, at least to me.
The actual card is at www.aliexpress.com/item/1005005945282926.html if I am allowed to link it.
Any advice gratefully received.

As soon as I sent the last message I spotted a card with Moschip
www.aliexpress.com/item/1005001572620629.html
I would still like to check I can't save the cost with the other one but I am guessing this is the way to go?

Last one should work.
No guaranties, though, there is no way of knowing without actually testing it.

I have asked the vendor about linux drivers. Assuming there is one I will give it a punt. Thanks again Tommy