5i25 firmware XML files for PNCconf

More
01 Oct 2012 12:24 #24783 by Piscis
Can someone please take a look at the screen shots attached and let me know what other step I need to take in order for PNCconf to be able to see my 5I25+7I77 servo card?

I followed this instructions (www.linuxcnc.org/index.php/english/compo...21670&catid=39#21670) and created those folders with no luck. PNCconf is showing the 5i20 among other but not the 5I25+7I77. I'm using the latest LinuxCNC version 2.51

Next week Mesa is shipping our second card Plug -n-go kit (5I25+7I76 and I will like to be able to use PNCconf to configure both our Step and Servo systems. Can you please help me with this?


Thanks

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:28 #24784 by Piscis
Attachments:

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:29 - 01 Oct 2012 12:32 #24785 by Piscis
Attachments:
Last edit: 01 Oct 2012 12:32 by Piscis.

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:32 #24786 by Piscis
Attachments:

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:33 #24787 by Piscis
Attachments:

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:33 #24788 by Piscis

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:36 #24789 by Piscis
Attachments:

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:37 #24790 by Piscis
Attachments:

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:37 #24791 by Piscis
Attachments:

Please Log in or Create an account to join the conversation.

More
01 Oct 2012 12:38 #24792 by Piscis
Attachments:

Please Log in or Create an account to join the conversation.

Moderators: cmorley
Time to create page: 0.102 seconds
Powered by Kunena Forum