Firstly I think you have the wrong idea of the support you have available, which is really second to none, in comparison.
Linuxcnc can be complex for the beginner, but we will never leave you cold and dry. We try to explain so in future you are able to learn the processes needed, which are not difficult once you have grasped a few points, you have to remember non of us know what your machine is, it's connections, or your ability.
Linuxcnc is very capable,from small diy hobby machines to massive machines weighing in tonnes.
OK back to your problem, we will need to know what connections you wish to make, do you have a diagram, tell us what machine all this is connecting to etc.
And what ballscrews your using, and how your spindle is running etc,yes it,s a long list, remember we can't see it.
Problems in the configs are easily solved, we just need them to be accurately relayed back. This in turn is also an way of you learning how to put it all together next time.
If you wish email me with details and we can put together what you need.
And above all enjoy linuxcnc.
