- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- 5i25 with Probotix Unity Controller Problems
5i25 with Probotix Unity Controller Problems
10 Apr 2016 01:06 #73025
by PCW
Replied by PCW on topic 5i25 with Probotix Unity Controller Problems
can you post your hal and ini files here?
Please Log in or Create an account to join the conversation.
10 Apr 2016 01:19 #73026
by Irritant
Replied by Irritant on topic 5i25 with Probotix Unity Controller Problems
Attached
Please Log in or Create an account to join the conversation.
10 Apr 2016 02:23 #73029
by PCW
Replied by PCW on topic 5i25 with Probotix Unity Controller Problems
Unless you know the probotics interface can run with 1 usec steps, i would set steptime and stepspace much wider
say 5 usec
say 5 usec
Please Log in or Create an account to join the conversation.
10 Apr 2016 02:26 #73030
by Irritant
Replied by Irritant on topic 5i25 with Probotix Unity Controller Problems
Could this be the reason it does not run at all?
Please Log in or Create an account to join the conversation.
10 Apr 2016 02:47 #73032
by PCW
Replied by PCW on topic 5i25 with Probotix Unity Controller Problems
it certainly could
Please Log in or Create an account to join the conversation.
Moderators: cmorley
- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- 5i25 with Probotix Unity Controller Problems
Time to create page: 0.206 seconds