How to link inputs ,outputs for Mesa 5i25 7i76

Todd Zuercher
Offline
Platinum Member

15 Jun 2016 16:43 #76105 by Todd Zuercher

Replied by Todd Zuercher on topic How to link inputs ,outputs for Mesa 5i25 7i76

No that doesn't look right. If you have the field power connected to the 7i76, and you have pressed the "Accepter..." button, I think it looks like a bug in the French translation of Pnconf.

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

15 Jun 2016 16:47 #76106 by andypugh

Replied by andypugh on topic How to link inputs ,outputs for Mesa 5i25 7i76

I just changed my locale to France, and I got the same problem as you :-(

I don't know why it makes a difference.

If you can temporarily switch the language to English then it will probably work. I realise that this should not be necessary.

Please Log in or Create an account to join the conversation.

finemeca
Offline
Banned

15 Jun 2016 18:36 - 15 Jun 2016 18:43 #76118 by finemeca

Replied by finemeca on topic How to link inputs ,outputs for Mesa 5i25 7i76

I have a laptop with lubuntu 12.04 I use to test.
Version linuxcnc 2.7.4
So no connected cards.
On this laptop, in French I have no problem!

The pc of the machine is ubuntu 10.04 with a install linuxcnc dating from May

I was wrong 7i64 is a card that is offered to me

Last edit: 15 Jun 2016 18:43 by finemeca.

Please Log in or Create an account to join the conversation.

finemeca
Offline
Banned

16 Jun 2016 09:25 #76140 by finemeca

Replied by finemeca on topic How to link inputs ,outputs for Mesa 5i25 7i76

Hello,

On the PC machine I have changed the language.
And it works.

Thank you all,

Pierre

Please Log in or Create an account to join the conversation.

Moderators: cmorley

Time to create page: 0.072 seconds