axis/tune error
13 May 2019 17:01 #133648
by Erikcnc
I think I am going to sit in the corner for a while.
Thank you...I just over looked it..
Never had to do that with my mill, so never thought about it.
Replied by Erikcnc on topic axis/tune error
[TRAJ]
AXES = 3
COORDINATES = X Z
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 2.50
MAX_VELOCITY = 25.00 <<<<<<<<<<<<<<<<<<<< = 1500 mm/m
I think I am going to sit in the corner for a while.
Thank you...I just over looked it..
Never had to do that with my mill, so never thought about it.
Please Log in or Create an account to join the conversation.
13 May 2019 17:34 #133651
by PCW
Replied by PCW on topic axis/tune error
That is the overall maximum velocity(any direction)
There are at least 5 settings that will affect the maximum velocity...
There are at least 5 settings that will affect the maximum velocity...
Please Log in or Create an account to join the conversation.
Moderators: cmorley
Time to create page: 0.110 seconds