Motor won't spin, MESA 5i25 + 7i76

I meant the port between the cards.

Yes I checked the jumpers, they are in default position.

I you want the 5I25 to supply 5V power to the 7I76 you need to set the jumpers like this:

7I76 W2 LEFT
5I25 W2 UP

prochj51 wrote: I meant the port between the cards.

Yes I checked the jumpers, they are in default position.

On the 5i25 to get power from the host computer .

W1 or W2 which ever you are using has to be in the UP position the default is Down.

Please check the manual first though ie 5i25 and 7i76

Edit PCW post at the same time He will be correct

Thanks a lot guys, that saved me!

I appreciate.