Forum Menu

Mesa connection issue

More
6 years 3 months ago #174211 by KaleD
Replied by KaleD on topic Mesa connection issue

PCW wrote:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 10.10.10.100


I have the same thing in the interface file. But,
netmask 255.255.255.0
at the bottom.

What should my setup file be?

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #174214 by PCW
Replied by PCW on topic Mesa connection issue
On my system, the interfaces.d/ directory is empty

Can you copy your interfaces file here again? It may have a typo
Also note that the interfaces file only gets read when the link goes up or down

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #174216 by KaleD
Replied by KaleD on topic Mesa connection issue

File Attachment:

File Name: interfaces3.txt
File Size:317 B

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #174217 by PCW
Replied by PCW on topic Mesa connection issue
OK that looks right
Can you reboot and run the ip a command?

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #174218 by KaleD
Replied by KaleD on topic Mesa connection issue

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #174220 by PCW
Replied by PCW on topic Mesa connection issue
The link shows as DOWN, is it connected?

Please Log in or Create an account to join the conversation.

Moderators: cmorley
Time to create page: 0.397 seconds
Powered by Kunena Forum